The Exhale 365 will be ready when 

you are. Once CO2 initiation has occurred, CO2 production will begin in earnest with peak CO2 production beginning after 30-45 days. CO2 will continue to be released for the remainder of 9 months.  Also available is the Exhale XL 

The Enhancer is made from all natural, 100% organic ingredients which when activated create a blast of CO2 that can reach 1200 ppm in a 12x12x12 area. 

Here's an easy way to reduce your environmental footprint and save money while doing it with the C02 refill pack!

 Precision accuracy flow meter 0.5-15 SCF/hour. Features a heavy duty solenoid valve, a high quality oiless pressure gauge. Includes two plastic tank washers and 12ft of C02 dispensing line. Brass construction for long lasting dependability and durability. 

 The TP1 is used for heating or cooling, between  55°F - 95°F (13°C - 35°C)

Differential ± 2°F (± 1°C)

Maximum 120V load : 15A (resistive, ballast), 10A (tungsten), 

1/2HP (motor, pump) 

The TP2 is used for heating or cooling, between 55°F - 95°F (13°C - 35°C) with Adjustable Differential 4°F- 20°F (2°C - 11°C)

Maximum 120V load : 15A (resistive, ballast), 10A (tungsten), 

1/2HP (motor, pump) 

 This Cycle timer features day only or night only or 24hours. The ON time from 10 sec. - 20 mins, and the OFF time from 1 min. - 12h

Maximum 120V load: 15A (resistive, ballast), 10A (tungsten), 1/2HP (motor, pump)

No bells and whistles here; just connect your CO2 generator and you’re set!
An affordable and simple C02controller.

Select one among five preset control values (1000, 1125, 1250, 1375 and 1500 PPM). Day/Night detection to turn off  during the night. One simple button calibration in fresh air (400 PPM) 

5 Amps Output (for CO2 burner valve or regulator coil)

With this controller, you can select one among five operating modes: cooling, cooling & dehumidifying, dehumidifying, humidifying, or heating. Has a remote sensor and 25 foot cable.

This monitors  C02, Relative Humidity and Temperature, and will alert when low/high C02 occurs. Runs on a 120V and comes with a micro USB cable and power adapter. 

1 yr warranty included.

This is an accurate electronic timer with 

Ballast grade relay for long term reliability. Power outage protection : hold cycle with built -in rechargeable battery and 20 minute hot start delay. 120V, 12A maximum. 5 foot piggyback power cord.